JCM1 electromagnetic diaphragm metering pump
Characteristic:
1 stroke speed adjustment range: 0-100 / min (the number of strokes per minute).
2 optional internal (manual) or external control mode.
3 adjustable response slope values for mA input signals.
4 of the input pulse signal by removing (1-999) / operation.
5 there are a number of cumulative function optional.
6 control board key lock function, can prevent misoperation.
7 "low level" off pump and alarm output.
8 programmable flow monitoring and alarm output.
9.6 stage pressure control.
10 with continuous no memory, no battery.
11 remote on / off control.
12 pulse output.
13 automatic line voltage compensation and overvoltage protection.
14 can set menu to select function or parameter.
15 have RS485 communication interface, standard Modbus RUN communication.
16 can be directly connected to DCS or FCS system, remote control computer.
Stroke speed adjustment range: 0-100 / min (the number of strokes per minute).
Optional internal (manual) or external control mode.
The response slope value of the mA input signal can be adjusted.
The input pulse signal by removing (1-999) / operation.
Batch function optional.
Control panel key lock function to prevent misoperation.
"Low level" off pump and alarm output.
Programmable flow monitoring and alarm output.
6 stage pressure control.
With no loss of memory, no battery.
Remote on / off control.
Pulse output.
Automatic line voltage compensation and overvoltage protection.
Menu can be set to select functions or parameters.
RS485 communication interface, standard Modbus RUN communication.
Direct access to DCS or FCS system, remote control computer.